3 Methods of Decorative Aggregate Exposure for Beautiful Polished Concrete

A developing pattern in adaptable, lovely ground surface arrangements that can likewise endure forever is the utilization of polished concrete. To accomplish such visual feel, the polished concrete exposed contractor first takes a gander at the concrete itself.

Working with Concrete

There’s a period respected saying about cement, whether handled or not, that it is reliably conflicting. Each and every pour will be unique in relation to the following, with varieties in shading, splitting and general levelness. Be that as it may, the general objective is for the floor’s evenness to be as even as could reasonably be expected, while pouring another piece, and in addition setting up the surface of a current chunk for wrapping up. Find out more information in this site.

Working with existing aggregate concrete chunks, results are controlled by the nature of the current cement. Shading varieties, pollutes, breaks, examples left by past floor covering, stains, nail gaps, fixed territories and evenness all influence the recently cleaned appearance.

3 Concrete Polishing Methods

The driveways Melbourne polishing process as a rule incorporates pounding down the surface to uncover diverse levels of total inside of the solid or the expansion of embellishing totals, for example, reused glass, arranging stone, nails, nuts, fasteners, ocean shells and others, seeded into the surface for enlivening purposes. There are three regular total decisions to consider with regards to polished concrete floors:

  1. Cream Polished or Surface Cream:

The top layer of the solid is produced using troweled bond glue that contains the concrete fines of the blend. Just 1/32 – 1/64-inch is expelled from the section surface, bringing about next to zero total introduction. This is a well known, efficient style; the cream is the purest, most predictable in shading, has the least blemishes and can be recolored any shading.

  1. Salt and Pepper:

The layer just underneath the cream produced using fine total – sand and little stone that gives the solid a “salt and pepper” look. To accomplish this look, 1/64 – 1/8-inch of the cream is uprooted by pounding the surface, uncovering little measures of medium total haphazardly all through. The perfect time to begin the crushing procedure is inside of 7 days of pouring the solid section, which uncovered only the appropriate measure of total.

  1. Uncovered Aggregate:

The layer beneath the cream and salt and pepper produced using coarse total inside of the cement decorative concrete. To achieve this layer, 1/8 – 1/4 – inch is ground from the surface, evacuating the main two layers. This procedure ought to begin very quickly after a solid chunk has been poured to inside of 3 days of pouring to accomplish the total presentation craved. Course total comes in three sizes: little, medium and extensive.

Subsequent to accomplishing the kind of total concrete polishing introduction, the concrete is polished to a sought clarity of reflection. 1) ground to a level sparkle, 2) sharpened to refined even appearance, 3) semi-cleaned, for fresh, smooth look or 4) profoundly cleaned, for a mirror

Check out some polished concrete examples here: http://www.houzz.com/ideabooks/28415753/list/objects-of-desire-beautifully-individual-concrete-floors.



There is no place like home. After a hard day’s work, we always look forward to going home and take our rest with our family. In approaching our house, we are welcomed with the opening of the gates and the beauty of our driveways leading to our garage or carport. We don’t want to spoil the moment with uneven pavements or even cracked cements. It will add headache instead of peace of mind. In Melbourne, Australia, concrete driveways are a common sight. They make sure not a single mud or dirt enters their abode. In this article, we will discuss the differences between exposed aggregate and decorative concrete so that you can decide on what to use on your driveway.

  1. Exposed aggregates and decorative concrete are both very durable. The former may be described as a mixture of minerals just like mixed or sand gravel that can be modified by adding color or texture while the latter has a smooth finish to avoid the dangers of slipping or tripping.
  2. Exposed aggregates come in different colors while decorative concretes have a flat finish but can be designed and colored. This is because exposed aggregates come in a variety of natural mineral colors and has a high value when it comes to On the other hand, decorative concretes can be enhanced by stamping and other treatments.
  3. Exposed aggregates will take a long time to finish or construct while decorative concretes are easier to apply. It will take almost a day pouring and smoothing the surface and spraying it with special chemicals to make the top durable and long lasting. The other one is easily poured and smoothed, and it takes only hours to dry and finish. Additional decorative treatments can be applied later at the discretion of the owner.
  4. Exposed aggregates and decorative concretes are both durable but may be affected by natural and man-made events. Both the surfaces can be sealed for longer protection, but exposed aggregates are prone to different weather conditions. When pebbles or small stones start to disintegrate or break, the problem cannot be reversed. Decorative concretes, on the other hand, are prone to crack or break due to a too-heavy load or accidentally falling heavy objects.
  5. Exposed aggregates are difficult to maintain while concrete decoratives are easy to clean. Foreign objects like leaves, sand or dirt can easily enter the gaps, and it is hard to remove them unless you use a powerful water hose. When you use it every day, it can create holes and will become a problem, unlike the decoratives that you can scrub or wash with ease as long as there are no cracks in between.

When you look again to the concrete driveways in Melbourne, you will really appreciate their elegance and beauty since it’s an important part of the homes. Whether going out or coming in, there is a sense of deep appreciation for these two wonders in construction.

More info in this link: http://www.gardening-landscaping-guide.com/why-choose-polished-concrete-vs-conventional-concrete-andor-traditional-flooring-in-australia/

Polished Concrete

Why Is Polished Concrete So Popular in Australia?

If you’ve picked up a design magazine recently, you’ve probably noticed that decorative concrete like polished concrete, exposed aggregate and stamped concrete are on the rise as a decorative trend in Australia. We’re looking at exactly why this is below.

Isn’t concrete flooring horrible?

In the past, concrete floors have had a terrible reputation. It’s seemed like a cheap, horrible and uncomfortable flooring solution, coupled with a difficulty to clean and a tendency to stain easily. Other forms of flooring, from granite to stone, have seemed much more appealing then plain cement. But those days are over. An offshoot of the rise of concrete driveways in Melbourne, decorative concrete flooring solutions open a whole new design vista.

Why polished concrete floors?

Of all the decorative concrete solutions available in Australia, polished concrete negates all the previous concerns about concrete flooring. Polished concrete grinds and polishes the concrete floor with diamond tips to make it not only dense and harder, but also considerably more easy to maintain. Concrete floors, whilst cool, have been too cold for winter weather, but polished concrete is considerably better at maintaining a consistent temperature that will keep you cool in summer without freezing you in winter.see the site:http://www.dezeen.com/2015/03/03/mihaly-slocombe-house-extension-timber-nursery-melbourne/

The terrible reputation of concrete for not only holding grime but actively shedding dust is also bypassed. Polished concrete floors are close to dust free and easy to clean- a simple moping when you have the time will do. Additionally, polished concrete doesn’t have to be soaked n dangerous chemicals, although getting the person who polishes if for you to use a non-slip coating will be beneficial both for your industry and your home if you have elderly or young residents. Additionally, they are pleasantly easy to maintain, and you will not need to spend every waking moment stressing about how to get the job done.

Can you customise a polished concrete floor?

There’s a reason that polished concrete has earned a place alongside more decorative concrete genres. It’s shiny and attractive, and additionally the reflective nature makes rooms appear brighter and more open. As an added benefit, you don’t have to install a new floor, but can refurbish and old and ugly one simply and with minimal hassles. There’s a huge range of ways to customise a concrete floor, too, from using a stain to installing stamping, stencilling and borders to add your unique touch to the design.

Polished Concrete

Can you polish a concrete floor yourself?

Whilst DIY polishers exist, it’s a job better undertaken by a specialist. That way you can ensure that you receive a consistent, lustrous depth across the entire surface. Polishing an existing concrete floor is already an incredibly economical solution, and it’s simply not worth the hassle and potential bad results to attempt to do this DIY. A good contractor will also be able to make the floor non-slip for you.see more info from http://www.designerpremix.com.au/.

Whether you’re rehabilitating an old and ugly concrete floor or installing a new one, decorative concrete solutions like polished concrete is a great way to get fabulous results simply and easily.

Polished Concrete Floors

3 Health Benefits of Polished Concrete Floors in Australia

Decorative concrete is all the rage in design at the moment. From polished concrete to exposed aggregate, there’s a huge range of options open to make your home and garden look slick, professional and stylish. But did you know there’s health benefits to using a polished concrete floor too?learn more here!

Why would I want a polished concrete floor?

Polishing is one of the easiest ways to rehabilitate and existing concrete floor. It’s no longer something you would find in a basement of factory floor, but a design feature you will long to draw your guest’s attention too. It’s even pretty cost effective to install. It can be sealed and stained to suit a wide variety of tastes, as well as stencilled, bordered and otherwise customised to sit your exact needs and taste. It’s even possible to put a logo on a polished concrete floor, making it perfect for businesses.

What other advantages and health benefits do polished concrete floors have?

Polished concrete has three main health advantages which make it a great choice:

• It’s sustainable
• It’s easy to keep clean and hygienic
• It’s dust and particle free (http://www.gardening-landscaping-guide.com/what-to-know-when-choosing-builders-of-custom-homes/)

The environmental sustainability of decorative concrete.

Polished concrete floors are environmentally sustainable. Sealed concrete provides almost no environmental impact. You’re simply sealing your existing concrete slap, and are freed from the need to install further flooring. The compounds used in the sanding process are low in volatility and so do not pollute the environment as do other options. This also means that they will increase the indoor air quality. Being easy to maintain means that they also do not use a ton of chemicals in the post-installation process. As it’s a very temperature stable surface, it ill also contribute to reducing heating and cooling bills, making your household more energy efficient.

Clean and Hygienic.

Polished concrete floors do not have extensive maintenance needs. They can be sealed regularly- again, the chemicals used for this process are low in volatility and dissipate quickly with little environmental impact. It’s simple to clean afterwards, too, as a simple mopping every now and again will do it. No need for fancy treatments and hazardous chemicals.

Dust and particle free.

Polished Concrete Floors

Dust and house mites can exacerbate and cause a number of breathing issues. Allergies to your home can be one of the worst ways to have to try to live. Polished concrete, however, is almost particle free. Unlike the fibres of carpet and the crevices of tiles and wood boards, there’s nothing to hold and accumulate grit, dust of mites. It’s a great way to create an environment to discourage allergies and their symptoms. Concrete also doesn’t trap moisture in under layers like carpeting felt and tiled or vinyl floors. Not only does this prevent warping and unsightly damage, but it will decrease the possibility of encountering mould and make for a happy, healthy environment.

If you’re looking for an eco option for flooring that’s simple to keep up, environmentally sustainable and has health benefits, look no further then polished concrete.